1. Drive LVDS screen with resolution 19201080 and below, which contains powerful audio and video processing functions, and can output high-quality pictures and sound quality. Two USB2.0 ports, support high-definition video and picture playback. Support the mutual copy function between USBs, which can facilitate users to update files.
2. Menu language: Chinese: Set the menu language to Chinese English: Set the menu language to English
3. Repeat mode: single repeat: play the same file in loop
4. Repeat all: play the files in the USB root directory in a loop
5. Repeat cancel: after playing the file in the root directory once, stop playing
6. Play record: Turn on the tape function, it will automatically record the file name of the play and the time of the start of the play, and also record the time when the machine is turned on and off
7. Power-off memory: automatically record the files played by the file during playback and during playback, the playback will continue at the last power-off after the power is turned on.
8. Picture transition mode: Set the transition mode when the picture is played. Picture play time: set the time for picture refresh
9. Rolling subtitles: Set whether to turn on rolling subtitles. Rolling caption color: set the color of the rolling caption font
10. Type of playback:
Picture: Only play picture files in the root directory of the memory card
Music: Only play music files in the root directory of the memory card
Video: Only play video files in the root directory of the memory card
11. Display clock: display the current date and time in the upper right corner of the screen
12. Timing setting: five periods of time can be set
13. Interstitial settings: Interstitial advertisements (minutes): This function sets the interval of advertisement interstitials, which can be set to a certain time between 1-60 minutes. If the interstitial function is not required, select "Off". Number of interstitial advertisements: This function sets the number of interstitial advertisements each time, you can choose from 1-9. When the number of interstitial advertisements is selected, the number of advertisement files is preferably an integer multiple of the set number.
14. Display settings
Brightness: adjust the brightness of the screen
Contrast: adjust the contrast of the screen
Color: adjust the color saturation of the screen
Sharpness: adjust the sharpness of the screen
Backlight adjustment: adjust the backlight voltage (0-100), 0 means the highest voltage, 100 means the lowest voltage
Noise reduction: set the noise reduction mode during video playback
Video mode: Set the display ratio of playing video files in three modes: 4:3, 16:9 and full screen
15. Automatic copying of files
This product supports copying a file from one USB to another USB. Create a file named COPY.TXT (uppercase) in the U disk to be copied. There is no need to write content inside, and the files that need to be copied are placed in the root. In the directory, check the target USB flash drive on the board, and insert the USB flash drive to be copied into another interface, it will be copied automatically. Please do not power off during the copying process.
16. MP3 lyrics display: Copy the MP3 lyrics file to the USB, and change the name to the same as the corresponding MP3 file.
17. Factory menu settings: press the up, down, left, and right buttons of the remote control in the stopped state to enter the factory menu settings: menu language: set the OSD display language
Swap AB: Adjust the AB swap function of the screen parameters, only the dual-line screen can adjust this item
Ti Mode: Ti Mode parameter of the adjustment screen 68BIT: 6 and 8 bits of the adjustment screen
Restore factory settings: Press the confirm button to restore some parameters to their default values
Software upgrade: copy the upgrade file to the USB root directory, press the confirm button and a dialog box will pop up to prompt whether to upgrade, press the left to select yes to upgrade, and do not power off during the upgrade process.
18. Automatic shutdown without USB: When the board is not connected to USB, it will count down to shutdown after 20 seconds, and automatically shutdown after 30 seconds without operation. After entering the countdown, plug in the USB or enter the menu to stop the countdown.
19. Expandable functions
Display logo: The user can first provide a 200180 BMP file, which can be compiled into the software and displayed in the upper left corner of the screen. Time-sharing volume: different volume can be set for different time periods
